background image

Cerberus P 6311-07A 

 

60

and the wall socket (unless your are using a Central Splitter or Central Filter installed by 
the qualified and licensed electrician), and ensure that all line filters are correctly installed 
and right way around; 

2. 

Missing line filters or line filters installed the wrong way around can cause problems with 
your ADSL connection, including causing frequent disconnects. 

 
Frequent loss of ADSL line sync (disconnections): 

1. 

The ISP provides the WAN IP address after authenticating you. Authentication may be 
through the user name and password, the MAC address or the host name; 

2. 

The username and password apply to PPPoE and PPPoA encapsulation only. Make sure 
that you have entered the correct 

Service Type

User Name

 and 

Password

 (be sure to 

use the correct casing). 

 

Problems with the Internet Access 

I cannot access the Internet: 

1. 

Make sure the router is turned on and connected to the network; 

2. 

If the ADSL LED is off, refer to Section 

ADSL LED

 of this troubleshooting; 

3. 

Verify your WAN settings; 

4. 

Make sure you entered the correct user name and password; 

 
Internet connection disconnects: 

1. 

If you use PPPoA or PPPoE encapsulation, check the idle time-out setting; 

2. 

Contact your ISP. 

 
If you have any troubles to configure or setup this ADSL Ethernet Router, please feel free to 
contact us. 

Содержание Cerberus P 6311-07A






























































Отзывы: