Pentagram Cerberus P 6311-07A, Руководство пользователя

Страница: 41 / 61

Cerberus P 6311-07A
41
Access Management Tab
ACL
Go to Access Management → ACL to enable remote management. Access Control Listing
(ACL) is a management tool that acts as a filter for incoming or outgoing packets, based on
application. You may use telnet or Web to remotely manage the ADSL Router. User just
needs to enable Telnet or Web and give it an IP address that wants to access the ADSL
Router. The default IP 0.0.0.0 allows any client to use this service to remotely manage the
ADSL Router.
ACL – There has Activated & Deactivated option. The default setting is Deactivated which
means all IP can access via router. If you choose Activated, you only can access via router by
listed IP addresses.
ACL Rule Index – Index number from 1 and up to 16.
Active – Once you choose Yes then you can access the IP via router.
Application – Each of these labels denotes a service that you may use to remotely manage
the Router. Choices are Web , FTP , Telnet , SNMP , Ping , ALL .
Interface – Select the access interface. Choices are WAN , LAN and Both .
UWAGA!
•
You must set one ACL index to access your router via LAN interface. If you don’t, your
router cannot access other listed IP Address. (Refer to Index 1).
•
Remember! Once you active your ACL function, you only can access via router by listed
Secure IP Address.
When you are done making changes, click on
SAVE to save your changes, DELETE to delete
the rule with the parameters you set or CANCEL to discard changes.