Install Drivers for 9000 Boards
36
- Reboot system and PenMount Windows NT Driver is removed from
system.
3.6.
Install PenMount Windows Universal Driver (for
2000/XP/XPT/XPE/2003/VISTA/7/WES7/2008/8)
Before installing
PenMount Windows Universal Driver
, you must have had installed
one of the operating systems from Windows 2000/ XP/ XPT/ XPE/ 2003/ VISTA/ 7/
WES7/ 2008/ 8 in your computer, and either PenMount 9036CH or 9026BH must have
been installed.
Before installing PenMount Windows Universal driver V2.4.0.306, you may modify the
default options from \PenMount Universal Driver V2.4.0.306\Driver\Install.ini:
Install USB
1. Install PenMount USB driver.
0. Uninstall PenMount USB driver.
COM
1. Install PenMount RS232 driver.
0. Uninstall PenMount RS232 driver.
MMonitor
1. Install PenMount driver for multi- device recognition.
0. Uninstall PenMount driver for multi- device recognition.
ENUM
1. Install PenMount driver for Non- pnp device recognition.
0. Uninstall PenMount driver for Non- pnp device recognition.
Option TouchReport
1. The default setting of Windows 2k/XP/Vista/7 is mouse mode.
2. The default setting of Windows 2k/XP is mouse mode;
the default setting of Windows 7/ Vista is digitizer mode.
EdgeOffset
0,5,10,15,20,25,30 are the default values for edge
compensation.
Smoothing
1. Turn on the smoothing function.
0. Turn off the smoothing function.
Operation
The default settings of operating mode:
0, Pen Input Emulation
1, Click on Touch
2, Mouse Emulation
3, Click on Release
CalibOffset
This function is unable to be modified.
RBtnPressNHold
0. Turn on long- pressed right key function.
1. Turn off long- pressed right key function.
Serial ScanAllPorts
1. Turn on “Scan All Ports” to confirm PenMount RS232 device.
0. Turn off “Scan All Ports” to confirm PenMount RS232 device.
COM3=xxxx,yyyy
To set up the permanent system COM port for PenMount RS232
driver.
COM3- to correct it to be correspondent with the actual COM
PORT.
xxxx- the supporting item number: 9000/ 6000 or PCI.
yyyy- the baud rate of 6000 or 9000 is 19200 or 9600;
baud rate 38400 is only for PCI items.
# Please note that the data above must be correct, so that the
device can just work normally, and ENUM must be set as 1.