Install Drivers for 9000 Boards
13
Before test, make sure the driver is loaded.
<1>. The test program is named 'MOUSETST.EXE'. You can run it with
parameter:
MOUSETST 18
The parameter is video mode number:
mode 18 (12h) : 640x480x16color
mode 19 (13h) : 320x240x256color
....
or run:
MOUSETST
to see what the parameters are
<2>. run pmtest.exe
<3>. edit
You can also run 'EDIT', the editor bundle in MS-DOS.
3.2.
Install PenMount Windows 3.1 Driver
Before installing the Windows 3.1 driver software, you must have the Windows 3.1
system installed and running on your computer. You must also have PenMount Serial
Interface either 9026BH or 9036CH control board installed.
3.2.1. Install
PenMount Windows 3.1 Driver
Contents of
PenMount Windows 3.1 Driver
folder are listed below.
COMPRESS.EXE
CTRLPAL.EX$
DETCMD.DL_
DIALOGUE
INSTALL.EXE
— Installation program for PenMount Windows 3.1 driver
MPEN.38$
MPEN.DR$
SHOWCUR.EX$
STFSETUP.EX_
STFSETUP.IN_
UNINSTPM.EXE
VER.DL_
If you have an older version of PenMount Windows 3.1 driver installed in
your system, please remove it first. Follow the procedure below to install
the PenMount Windows 3.1 driver.
1. Make sure the Windows 3.1 system is installed in your computer. The
PenMount Windows 3.1 driver lets your touch screen coexist with a
mouse. If you wish to use a mouse and touch screen at the same time,
