Penman Collection KASSEL, Руководство по установке

Страница: 6 / 16

1.0 USER INSTRUCTIONS
1.5 Health and safety
The necessary feed pressure for chimney examination given on the technical data sheet is the necessary minimum value at the
flue outlet of the stove. This is necessary for safe operation of the stove. Practice shows that higher, sometimes too high, feed
pressure exists in chimneys. Such high feed pressure (more than 20 Pa) can lead to uncontrollable combustion process that can
damage the appliance itself, the connecting flue pipe and the chimney system as a whole. Contact a registered HETAS engineer
or a competent person about finding a solution in such cases, we recommend the use of a feed pressure regulator (flow control
valve in the flue or providing secondary air inside the chimney).
Olsberg stoves comply with DIN 18891 (building category 1) and DIN EN 13240 standards.
Olsberg stoves are freestanding stoves that cannot be equipped with an individual cover or be built in as a fire chamber insert/
cassette. You must not make any modifications influencing the operation of the stove.
Remove all packaging and supporting materials from the chamber and all accessories from the ash drawer and the wood case.
Make sure that the lining of the fire chamber and all pieces of the dead plates are in the correct place and fitted correctly. Do
not use the stove without these components. Take care as the packaging material can contain nails and other sharp pieces of
metal, which can cause injury to you and the stove. Take care that the nylon and other wrapping materials do not get in chil-
dren’s hands, as they can cause suffocation. Carefully collect the packaging materials mentioned above, and take them to the
local waste disposal site.
The stove is painted in high temperature paint and high quality heat resistant lacquer that gains its final stability when heating
up for the first time. The smell at the first heating up derives from the evaporation of the protection lacquer in the paint. So the
heated room must be carefully ventilated from time to time (every 1-2 hours). The smell will stop after a while of burning.
Do not put anything on the stove before the first heating up and do not touch its surface to prevent damage of lacquering. Use
protective gloves for your own protection and for the sake of the intactness of the lacquering.
The doors of the stove should be kept slightly open during the first heating up so the insulation cord does not stick to the front
of the stove.
Caution
Surfaces are hot. When you operate the appliance wear gloves and use the operating handles of the stove. The glass is hot.
Keep children away.
Never use spirits, petrol or any other flammable and explosive substance for lighting the fire.
Don’t place combustible objects inside the radiation area of the fireplace, within 100 cm from the door of the combustion
chamber.
PAGE 6