Ultra1000 Wireless Detectors
(Battery Operated)
Rev 2
Page 21
Install the circuit board back inside the junction box carefully not to detach the antenna
coax cable. Secure the circuit board on the standoffs with three each machine screws
(#6-32).
Re-Install the battery and transmitter board assembly as outlined in the beginning of
section 1 (installation & Startup).
Unit is now ready to power ON and operation.
Note:
Detector must be calibrated anytime a new sensor head is installed. Wait at least 5
minutes after warmup to calibrate the sensor.
R
G
W
B
Ribbon Cable to
Transmitter Bd.
To Antenna
Connector
Sensor Connection
Terminal
Sensor Head
Assembly
R
ed
G
re
e
n
W
h
it
e
B
la
ck
Wireless
Transceiver
Figure 4 Connection board inside the Sensor junction box. Bottom view