PEMTECH PT750 Series W, Руководство оператора

Страница: 13 / 17

Normal Operation
In normal operation the display screen will show the live reading of all the detectors. The
data on the screen is typically updated every 2 to 3 seconds. Each data block for a sensor
displays the gas readings as well as any diagnostic and trouble message. Following are
sample data display for a sensor.
Sensor at Shale Shaker (Normal state)
Sensor at Shale Shaker High H2S
Gas Reading starts flashing in Red
Control Module on channel 8 (Fixed Gas Monitor), Module
in alarm bypass mode via Toggle switch on the module
Sensor in FAULT
Sensor in Calibrate Mode
Communication Failure with control module
Low Battery Signal. Only for battery operated
wireless Gas detector