PEMTECH PT750 Series W, Руководство оператора

Страница: 15 / 17

Alarm Reset
When RESET button is pressed, the annunciator will send command to the control panels to
deactivate the alarms. However, if the high gas condition still exists the control panel will
reactivate the alarms. If alarms are cleared, pressing the RESET will clear the flashing sensor
location tags if any.
Alarm Bypass
Pressing the Alarm Bypass button will send the command to the control panel. The bypass
mode on the fixed control panel is a soft bypass for 30 minutes. After 30 minutes all the
control modules on the fixed system and wireless controller will return to normal mode.