Peloton Bike PL-11, Руководство пользователя

Страница: 9 / 13

EVERY 3 TO 5 RIDES
CONTINUED
CLEATS:
Use a 4 mm Allen wrench to tighten any loose
screws attaching your cleats to your cycling shoes.
SEAT: Make sure the seat is parallel to the ground.
Then use the included combination wrench to tighten
the seat-fixing nuts on both sides.
M A I N T E N A N C E A N D C A R E
AFTER EACH RIDE
CLEANING:
Wipe down the bike using a damp cloth .
LEVELLING FEET:
If the bike rocks back and forth,
turn each leveling foot clockwise (when viewed from
above) until it rests firmly on the ground.
EVERY 3 TO 5 RIDES
CLEANING:
Clean the bike thoroughly using a damp
cloth and a mild household cleaner diluted in water.
Clean the touchscreen using an electronics wipe.
PEDALS: Tighten any loose pedal with the included
15 mm wrench. Pedals should be tightened to 25 lb-ft
of torque. Turn clockwise to tighten the right pedal
and counterclockwise to tighten the left pedal.
CAUTION: To ensure safe operation and optimal performance, check for wear and damage and perform maintenance
on a regular basis. Replace any damaged or defective parts immediately. Do not use the bike until the repair is performed.
Only use original parts from the manufacturer. Changes or modifications to this unit not expressly approved by Peloton
could void the warranty.
16 17
CAUTION: Service other than the procedures described here must be performed by an authorised technician.
EVERY 15 TO 20 RIDES
EMERGENCY BRAKE:
Press down on the resistance
knob while pedaling slowly. The flywheel should come
to a complete stop immediately. If it does not, stop using
the bike immediately and contact Peloton Support.
FRAME: Check the entire frame for signs of wear
and damage, and tighten any loose bolts.