Pello Reddi, Руководство пользователя, Страница: 19 / 32

19
Install Front and Back Reflectors and Bell
Reflectors are an important safety feature and legally required on bikes
purchased in the USA. Take the two (red and white) reflectors from the
small parts box and install as follows.
Use a Phillips head screwdriver to attach the white
reflector bracket to the handlebars facing forward.
*Note: Ripple, Romper & Revo reflectors have a small
shim inside the clamp. This is so we can create a bar
diameter that is very small for little hands to grab
confidently.
Use a Phillips head screwdriver to attach the red
reflector bracket to the seat post under the saddle
facing backward.
Step 1/3
Step 2/3
Use a Phillips head screwdriver to attach the bell to
the handle bar. Let your child determine where the bell
should go, right or left side. You can adjust the bell
hammer by rotating it as needed.
*Note: Ripple, Romper & Revo reflectors have a small
shim inside the clamp.
Step 3/3
Close quick release
seatpost clamp