Pello Reddi, Руководство пользователя, Страница: 18 / 32

18
Assembling your bike cont...
Once the seatpost is inserted and to the correct height,
close quick release clamp. If seatpost is not tight in seat
tube, tighten the quick release lever with the adjusting
screw on opposite side of lever.
A good starting angle of the saddle is parallel with the
ground. If needed you can adjust the saddle angle by
loosening the 6mm bolt under the saddle. This also al-
lows you to move the saddle back and forth to adjust the
fit of the saddle (more in the “bike fit” section).
**Note: The ripple comes with a longer seatpost if you
need to extend your childs time on the balance bike be-
fore moving to a pedal bike, simply install the longer one
onto the saddle.
Close quick release
seatpost clamp
Step 3/3