manualshive.com logo in svg

Pella INSYNCTIVE DESIGNER Series, Руководство по эксплуатации продукта

Поделиться
Скачать
Pella INSYNCTIVE DESIGNER Series Скачать руководство пользователя страница 6

PELLA

®

 DESIGNER SERIES

®

 BETWEEN-THE-GLASS BLINDS AND SHADES WITH INSYNCTIVE

®

 TECHNOLOGY

  | 

 6

 

•  Press and release the Down button to send BLIND or    

 

  SHADE to its lower position. If you would like to change  

 

  this position, follow the procedure for Programming the  

 

  Lower Position on page 7 of this product guide.

 

•  Press and release the Center button to send BLIND or    

 

  SHADE to its user position. The user position is set by    

 

  the factory at approximately 50% of the distance between   

 

  fully opened and fully closed positions. If you would  

 

 

  like to change this position, follow the procedure for    

 

  Programming the User Position on page 7 of this  

 

  product guide.

 

•  Press and release the Up button to send BLIND or  

 

   SHADE 

to its upper position. If you would like to change  

 

  this position, follow the procedure for Programming the  

 

  Upper Position indicated below.

 

•  BLIND or SHADE is now ready for use.

PROGRAMMING POSITIONS 

See 

InsynctiveSupport.Pella.com

 for how-to videos.

 

 REMOTE may be used to program up to three positions to  
BLIND or SHADE with Insynctive

®

 technology, including an upper 

position, user position and lower position. Once placed into 
program mode, REMOTE will stay in program mode until the 
programming process is completed, or REMOTE will automatically 
exit program mode if no buttons are pressed for 1 minute or if 
battery is removed and reinserted.

Programming Upper Position

 

•  Touch the top end of REMOTE to BLIND or SHADE cover  

 

  approximately 6" from the end where the wire connects.  

 

  Move REMOTE back and forth slowly until BLIND or SHADE  

 

  completes a quick up/down motion to indicate BLIND or  

 

  SHADE has entered program mode. 

 

•  Simultaneously press and hold the Center and Up buttons  

 

  until BLIND or SHADE completes a quick up/down motion.  

 

  This will require the buttons to be pressed for about 5    

 

  seconds. The light on REMOTE will begin blinking when  

 

  the buttons are released to acknowledge that REMOTE is  

 

  in program mode.

DETAILED INSTRUCTIONS 

(continued)

UP  

BUTTON

DOWN

BUTTON

LED  

LIGHT

CENTER  

BUTTON

COVER

REMOTE

MEASURE 6"  

FROM END WHERE 

WIRE CONNECTS

Содержание INSYNCTIVE DESIGNER Series
















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды