manualshive.com logo in svg

Pella INSYNCTIVE DESIGNER Series, Руководство по эксплуатации продукта

Поделиться
Скачать
Pella INSYNCTIVE DESIGNER Series Скачать руководство пользователя страница 11

PELLA

®

 DESIGNER SERIES

®

 BETWEEN-THE-GLASS BLINDS AND SHADES WITH INSYNCTIVE

®

 TECHNOLOGY

  | 

 11

ADDITIONAL INSTRUCTIONS

CHARGING BATTERY IN BLINDS AND SHADES

 

 The solar panel requires approximately 3 hours of direct sunlight each 
day to charge the battery for BLIND or SHADE operation solely by 
power generated from the exterior solar panel. Additional charging 
is necessary when the solar panel on the exterior of the unit does not 
receive adequate sunlight. 

 

•   First, plug in Pella

®

 Insynctive

®

 WALL CHARGER (sold separately) to 

a wall outlet.

 

•   Attach the charger cord to the charge connector on the lower left 

or right corner of your unit’s Hinged Glass Panel (HGP).

 

•   Charge for approximately 12 – 24 hours to fully recharge the 

BLIND or SHADE battery.

CARE AND MAINTENANCE

 

Cleaning Between-the-Glass Aluminum Blinds

 

•   First make sure BLIND is in the horizontal (opened) position, 

then open the Hinged Glass Panel (HGP). To remove dust, use a 
vacuum cleaner with an upholstery brush attachment. You can 
remove smudges or fingerprints with a damp cloth.

Cleaning Between-the-Glass Cellular Shades

 

•   Begin by making sure SHADE is fully extended, then open the 

HGP. To remove dust, use a vacuum cleaner with an upholstery 
brush attachment. Smudges or fingerprints can be carefully 
removed with a damp cloth. Never use cleaners with ammonia — 
they will damage the fabric. If there are any exposed threads,  
trim them and seal them with a fray-check solution (available at 
most fabric stores) to reduce fraying. Once SHADE is clean and 
dry, raise SHADE before closing the HGP.

Solar Cell

 

•   For optimal performance of the solar cell, keep the exterior 

glass surface clean of dust and dirt. It is recommended that the 
exterior glass surface be cleaned every six months or whenever 
dirt noticeably builds up on the glass. Use an ammonia-free glass 
cleaner and soft cloth.

    

CAUTION: 

DO NOT remove or cut the white cord that limits the 

opening of the hinged glass panel. Doing so may cause serious 
damage, including glass breakage, to your Pella product. The 
cord should only be detached by a qualified technician when 
performing service-related procedures.

HINGED 

GLASS  

PANEL

(HGP)

SOLAR  

PANEL

CORD

Содержание INSYNCTIVE DESIGNER Series
















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды