L.
Insert backer rod and apply sealant
. Install siding, and insert backer rod between the each
jamb cover and the exterior finish material as deep as it will go. Apply a bead of high quality
exterior sealant on top of the backer rod and a corner bead to the top of the head frame
expander. Shape, tool, clean excess sealant. When finished, the sealant should be the shape of
an hourglass.
Note: Backer rod adds shape and depth for the sealant line. This method creates a more
flexible sealant line capable of expanding and contracting.
7
INSTALLING INTERIOR JAMB COVE MOULD
A.
Install the interior
cove mould
. Remove
cove mould from
accessory package
and dry fit over the
installation screws.
Install interior cove
mould and secure
with 1" brads into the
jamb and trim.
7
A
Cove Mould
NEW
CONST
NEW
CONST
ALL
ALL
ALL
ALL
ALL
ALL
