background image

INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACIÓN 

FOR CLAD SLIDING PATIO DOOR 

PUERTA CORREDERA PARA PATIO

Installation Instructions for Typical Wood Frame Construction.

These instructions were developed and tested for use with typical wood frame wall construction in 
a wall system designed to manage water. 

These instructions are not to be used with any other 

construction method.

 Installation instructions for use with other construction methods, multiple 

units or bow and bay windows, may be obtained from Pella Corporation or a local Pella retailer, 
or by visiting 

http://www.pella.com

. Building designs, construction methods, building materials, 

and site conditions unique to your project may require an installation method different from 
these instructions and additional care. Determining the appropriate installation method is the 
responsibility of you, your architect, or construction professional. 

Sill Flashing Tape #2

Sill Flashing 

Tape #1

Water 

Resistive 

Barrier

Sheathing

Framing

Nailing Fin

Sill 

Support

Top

Flashing

Tape

Fin

Corner

Door 

Top

Door 

Bottom

Side

Flashing

Tape

Interlocker

Side

Flashing

Tape

Corner

Flashing

Tape

Corner

Flashing

Tape

Part Number: 801W0103

©2008 Pella Corporation

Always read the Pella

®

 Limited Warranty before purchasing or installing Pella products. By 

installing this product, you are acknowledging that this Limited Warranty is part of the terms of the 
sale. Failure to comply with all Pella installation and maintenance instructions may void your Pella 
product warranty. See Limited Warranty for complete details at 

http://warranty.pella.com.

Содержание 801W0103









Отзывы: