Pelican 1354 NaturSoft Custom Salt Free
Water Softener/Conditioner
© 2013 Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
Rev B
Page 9
www.pelicanwater.com
(877) 842-1635
Media Flush/Condition
1. After the tank has soaked for 60 minutes, turn the main water supply back on or turn the Bypass
Valves back into their original position.
2. Flush the system by running water for 5 minutes at a high flow rate of 5 GPM (this can be
achieved by using a bath tub or more than 3 faucets).
Note:
The flush water may have a milky look to it. This is normal as calcium carbonate fines are
flushed from the system.
3. Rinse the system by reducing the flow rate to ½ GPM and run water for 60 minutes (this can be
achieved by turning one faucet ¼ of the way on).
Complete the Installation
1. Turn on the main water supply.
2. Check for leaks.
3. Peel off the protective plastic wrap from the stainless steel tank jacket.
Clean your Hot Water Heater (optional)
Cleaning and restoring the plumbing system is a major benefit of the NaturSoft system. In order to
minimize the time required to complete the de-scaling process, we strongly recommend cleaning your hot
water heater after a period of 3 weeks:
Turn off the heat source, attach a hose to the drain valve at the bottom of the tank and flush the
heater by opening the drain valve. After the water heater is completely filled with water, turn the heat
source back on.
Alternatively, open several fixtures in the home and let water run simultaneously for a couple of
minutes. Focus on the hot water side and high flows like the bathtubs. This method is not quite as
effective.
