Pelican 1354 NaturSoft Custom Salt Free
Water Softener/Conditioner
© 2013 Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
Rev B
Page 7
www.pelicanwater.com
(877) 842-1635
Pre-Filter Installation
Figure 3
1. Shut off the water.
2. Attach the Mounting Bracket to the wall using the supplied Phillips Head Screws and Washers.
3. Attach the Pre-Filter System to the Mounting Bracket using the supplied Bolt Head Screws.
4. Lube the o-ring with clean silicone grease before attaching the cover onto the housing.
5. Tighten the Blue Pre-Filter Housing using the supplied Pre-Filter Wrench (counter clockwise).
6. Determine the size of your inlet water supply line. PVC Reducers may be needed to fit the 1-½”
Pre-Filter System.
Notice:
The Pre-Filter Housing comes with a 1-½” threaded female inlet/outlet and will require additional fittings
to adapt to your plumbing. It is recommended that a shut-off valve and a bypass be plumbed in around
the system before installing the Pre-Filter system.
Top View Pre-Filter
Blue Pre-Filter Housing
Inlet Water
Supply
Mounting
Bracket
