EN 25
INSTALLATION
General
This appliance should only be connected by a registered installer! The gas connection and the
electrical connection must comply with national and local regulations.
Warning!
This appliance must be earthed at all times.
Installation, maintenance, or repairs should only be carried out by professionals who are
authorised by the manufacturer, as failure to do so will void the guarantee.
The device should be disconnected from the mains prior to installation, maintenance or repairs.
The device is only disconnected from the electric power if:
• The main switch of the domestic electrical system is switched off, the fuse of the domestic
electrical system has been completely removed, or the plug has been pulled out of
the socket.
Faulty parts may only be replaced by original Pelgrim parts. Only those parts are guaranteed by
Pelgrim to meet the safety requirements.
To avoid dangerous situations resulting from any damage to the connecting cable, this should
only be replaced by the manufacturer, the manufacturer’s service organisation or suitably
qualified persons.
Gas connection
• We recommend that the hob be connected by means of a fixed pipe. Connection using
a specially designed safety hose is also permitted.
• The pipe behind the oven must be made entirely out of metal.
Warning!
▷
A safety hose may not be bent and must not come into contact with moving parts
of kitchen units.
▷
The connection tap for the appliance must always be positioned such that it is
easily accessible.
▷
The type of gas and the country for which the appliance has been designed are
indicated on the appliance identification card.
Before using the appliance for the first time check the connections, using water
and washing-up liquid to ensure that there are no gas leaks.
