Pelgrim OVS524MAT, Инструкция по эксплуатации

Страница: 10 / 32

EN 10
▷ Soak the test paper strip for 1 second in water. Wait 1 minute
and observe the number of stripes on the paper. Check the table
for appropriate water hardness setting.
Display
Test strip number/
color of stripes
Type
French deg.
(°df)
German deg. (°dH)
1 4 green stripes Very soft water 0 - 9 0 - 5
2 1 red stripe Soft water 9 - 18 5 - 10
3 2 red stripes Medium hard water 18 - 26 10 - 15
4 3 red stripes Hard water 26 - 35 15 - 20
5 4 red stripes Very hard water >35 > 20
1. Turn the ‘Multi-function selector’ to set the appropriate water
hardness (see table).
2. Confirm the setting by pressing the ’Start / stop’ key.
Setting the descaling process
You can activate or deactivate the descaling process by selecting ‘on’
or ‘off’. You do not have to descale your appliance immediately. You get
a note in the display when you need to descale your appliance.
1. The descaling setting must be ‘off’.
2. Confirm the setting by pressing the ’Start / stop’ key.
End
You can leave the ‘Settings menu’.
1. Confirm the setting by pressing the ’Start / stop’ key.
How to open the ‘Settings menu’
You can open the ‘Settings menu’ at any time by rotating the ‘Multi-
function selector’ to the right and hold it there for three seconds. The
‘Mode selector’ must be in position ‘0’.
• Press the ’Start / stop’ key to scroll through the settings.
• To change a setting, turn the ‘Multi-function selector’.
• Rotate the ‘Mode selector’ to the right or left and rotate it back to
‘0’ to leave the ‘Settings menu’.
FIRST USE