pela tools 514019, Руководство пользователя

Страница: 17 / 32

Note! To achieve the reliability of hooks and clinch switch dampers, use the following methods to keep the
valves clean:
1. Remove the left side cover of the machine head by unscrewing the two screws.
2. Release the valve muffler (A) belonging to the hooks opening and closing pedals and the clinch brake
pedal.
3. Clean the mufflers with compressed air, please replace them with reference to the spare parts list if it is
damaged.
Troubleshooting
Issue Reason Solution
The mounting table only rotates
in one direction or cannot rotate.
1. The reversing switch is
broken.
2. The belt is broken.
3. Engine malfunction.
1. Replace.
2. Replace the belt.
3. Check the power supply to
the motor. Replace the
engine.
While fitting the tyre, the table is
not locked in place.
The hooks open/close slowly.
The mounting table locks the tyre
in place incorrectly.
1. Air leakage.
2. The cylinder does not work.
3. Worn hooks.
4. The cylinder sealing rings
have been broken.
1. Check all parts of the
compressed air system.
2. Replace the cylinder piston.
3. Replace the hooks.
4. Replace them.
The mounting head always
touches the rim during mounting.
1. The locking plate is poorly
adjusted or incorrect.
2. Loosen the screws. The
auxiliary arm cannot be
locked vertically.
1. Replace the plate or adjust it.
2. Tighten the screws. Replace
the locking plate.
The pedal of the clincher and
the hooks do not return to their
original position.
1. Pedal spring broken. 1. Replace spring.
The clincher is difficult to use. 1. Muffler blocked.
2. The sealing ring in the
cylinder of the clincher is
broken.
1. Clean or replace it.
2. Replace it.