pela tools 50640, Руководство пользователя

Страница: 19 / 34

16. Remove adjustment tools and keys
• Make a habit of checking that keys and
adjustment tools are removed from the tool
when you turn it on.
17. Avoid unintentional start
• Make sure the power switch is off when
connecting.
18. Use extension cords for outdoor use
• When using the tool outdoors, use only wires
intended for outdoor use.
19. Be alert
• Look at what you are doing, use common sense
and do not use the tool when you are tired.
20. Inspect damaged parts
• Before further use of the tool.
• It should be carefully checked if it works
properly and can perform the intended function.
• Check that the moving parts are adapted,
that the brackets for the moving parts are not
damaged and that parts are mounted correctly
and that other circumstances can not affect its
function.
• A guard or other damaged part must be
properly repaired or replaced by an authorised
workshop unless otherwise stated in this
manual. Have defective switches replaced by
an authorised workshop.
• Do not use the tool if the power switch does
not turn on and off.
21. Warning
• The use of accessories other than those
recommended in these operating instructions
may pose a risk of personal injury.
22. Have your tool repaired by a qualified
person
• This power tool complies with current safety
regulations. Service should only be carried
out by qualified personnel using original spare
parts, otherwise this could endanger the user.
23. Never stand on the tool
• Serious damage can occur if the tool is tilted or
if the cutting tool is touched accidentally.
24. Power supply
• Regarding the power supply, voltage errors
should be /- 10% V, value errors should
be /- 1Hz.
• The power supply must be installed with both
under and overvoltage protection.
25. Operating conditions
• The temperature in the environment should
range from 5 to 40 °C.
• The relative humidity should be within
30% –95%.
• The height must not be higher than 1000M.
• When moving and storing the tool, the
temperature should be kept between 25 ° and
55 °C.
26.Protective gloves, goggles and earplugs of
PPE is needed when using the saw.
27. The oil used must be non-toxic
28. Maintenance
• Before maintenance, the power plug must be
removed from the wall socket.
29. WARNING
• Make sure that all protective parts are attached
before you start using the saw.
WARNING!
1. Always keep the guards in place when the
machine is in use. If removed for maintenance,
use extreme caution and replace protection
immediately.
2. Replace warning labels if they are hidden or
removed.
3. Give your work undivided attention. Looking
around, talking etc. are actions that can lead to
serious injuries. Never leave the tool
unattended. Turn off the power and do not
leave the tool until it has stopped completely.
4. Always keep hands and fingers away from the
blade when the machine is running.
5. Never hold the workpiece with the saw in a
horizontal position. Always use the anvil and
screw it on.
6. Read and understand warnings on the machine.
7. Keep belt guards and wheel guards in place and
in order.
8. Always leave enough support for long and
heavy materials.
9. In urgent cases, the oil pan should be closed
immediately to protect against accidents.
10. Never clean the saw blade or band wheel on
a band saw with a hand-held brush or scraper
while the saw blade is in motion. Adjust and
position the blade control arm before you start
sawing. Hold the blade guide arm with a firm
hand. A loose blade guide arm affects the
accuracy of the saw. Make sure the tension and
blade staple are set correctly. Check the
tension after the first sawing with a new blade.
To extend the life of the blade, always release
the blade tension at the end of each working
day. Make sure the blade speed is set correctly
for the material to be cut.
11. Check coolant daily. Low coolant levels can
cause foaming and high blade temperatures.