Pego ECP300 EXPERT VD Series, Руководство по эксплуатации и обслуживанию

Страница: 6 / 40

ECP300 EXPERT
Page 6
USE AND MAINTENANCE MANUAL
Rel. 01-21
PRODUCT SERIES
– TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS ECP300 EXPERT VD 4 ECP300 EXPERT VD 7
Box dimensions 400x300x135 mm 400x300x135 mm
Weight 9 Kg 10 Kg
Protection rating IP65 IP65
Power supply (3F+N+T) 400Vac ±10% 50/60Hz 400Vac ±10% 50/60Hz
Type of electric load 3-phase 3-phase
Working temperature - 5 ÷ + 40 °C - 5 ÷ + 40 °C
Storage temperature -25 ÷ +55 °C -25 ÷ +55 °C
Relative ambient humidity
From 30% to 95% RH without
condensate
From 30% to 95% RH without
condensate
Altitude < 1.000 m < 1.000 m
Main switch / general protection
Interruption power 4 poles magnetothermic 16A
“D”
Icn=6kA / Ics=8kA / Icu=15kA
4 poles magnetothermic 25A
“D”
Icn=6kA / Ics=8kA / Icu=15kA
Compressor protection Adjustable motor circuit breaker Adjustable motor circuit breaker
Control PEGO PEGO
Defrosting Electrical Electrical
Status indicators LED + display LED + display
Alarm signals LED + Buzzer LED + Buzzer
INPUTS
Ambient probe NTC 10K 1% NTC 10K 1%
Evaporator probe NTC 10K 1% NTC 10K 1%
Door switch Present Present
High/low pressure switch Present Present
Kriwan
®
connection Present Present
Compressor functioning mode
selection
Pump-down / Thermostat Pump-down / Thermostat
OUTPUTS
Compressor
See motor circuit breaker thermal range
relative to PEGO panel ID code
See motor circuit breaker thermal range
relative to PEGO panel ID code
Condenser fans output 1
800W (1ph) 800W total (1ph)
Condenser fans output 2 (separated)
Evaporator fans 500W (1ph) 2000W (1ph / 3ph)
Defrosting heaters 6000W (AC1) eq. resistive load 9000W (AC1) eq. resistive load
Room light 800W (AC1) resistive load 800W (AC1) resistive load
Solenoid valve Present Present
Compressor oil heater Present Present
Aux1 100W 100W
Aux2 100W 100W
Supervision system TeleNET or Modbus TeleNET or Modbus
2.2
CHAP. 2 - Technical characteristics