ECP300 EXPERT
Page 12
USE AND MAINTENANCE MANUAL
Rel. 01-21
STANDARD EQUIPMENT FOR ASSEMBLY AND USE
The
ECP300 EXPERT
electrical panel, for assembly and use, is equipped with:
• Nr 4 sealing gaskets, to be placed between the fixing screw and the back of the box.
• Nr 1 use and maintenance manual.
• Nr 1 wiring diagram.
• Nr 1 drilling layout.
• Nr 2 NTC probes 10K 1% .
MECHANICAL ASSEMBLY OF THE PANEL
❑
Each panel is designed for wall mounting; choose an appropriate fixing
system, depending on the weight of the panel and the type of support on
which it will be fixed.
❑
Install the panel in places that respect its IP rating.
❑
Keep the IP protection level of the appliance intact by properly assembling
the cable glands and/or the pipe clamps with appropriate characteristics.
❑
Install the panel at a height that allows the operator an easy use and internal
access. The operator should not come to be in a dangerous situation when
he is working on the panel. The height must however be between 0.6 and 1.7
meters from the floor.
❑
Install the electrical panel in an area away from sources of heat and possibly
protected from atmospheric agents.
Following are the steps to perform a correct mechanical installation of the panel.
CHAPTER 3: INSTALLATION
CHAP. 3 - Installation
3.2
3.1
