ECP300 EXPERT
Page
21
USE AND MAINTENANCE MANUAL
Rel. 01-21
CLOSING THE ELECTRICAL PANEL
Once the electrical connections, checks and calibrations have been completed, the
electrical panel can be closed.
Fig.18:
Close the front panel, making sure
that all cables are inside the box and
that the box gasket is correctly
housed.
Fig.19:
Tighten the front panel using the 4
screws. Refit the cover of the screws
on the right side.
Fig.20:
Power up the panel and carry out
thorough reading / programming of
all the parameters.
CHAP. 3 - Installation
3.7
