ECP300 EXPERT
Page
35
USE AND MAINTENANCE MANUAL
Rel. 01-21
GENERAL SAFETY RULES
Whatever the nature of the maintenance, it must be performed exclusively by specialized
technical personnel.
In the event of a fault or maintenance to the electrical system, before
proceeding with any checks, the panel must be disconnected from the mains
power switch in the open position (O). Check the absence of voltage with a
Tester before any operation
.
Each element of the electrical panel, if it proves to be faulty, must be
replaced only with original parts.
If maintenance involves parts outside the panel, perform the following steps:
❑
Securely and safely isolate the panel power supply in one of the following
ways:
1) Turn the 300 EXPERT main switch OFF and padlock the front
cover.
2) Isolate the power supply upstream of our panel permanently, by
tapping it to OFF).
❑
Put signals to indicate that the machine is under maintenance.
Before proceeding with maintenance operations, carry out the following
safety instructions:
❑
The electrical panel must be disconnected from the power supply.
❑
Prevent unauthorized personnel from being present in the intervention
area.
❑
Put signals to indicate that the machine is under maintenance.
❑
Wear work clothes (suits, gloves, shoes, headgear) suitable and free of
free appendages.
❑
Remove, if worn, any object that can get caught in protruding parts of the
electrical panel.
❑
Have accident prevention equipment and tools suitable for operations.
❑
Tools must be clean and degreased.
❑
Have available the technical documentation necessary to perform the
maintenance intervention (wiring diagrams, tables, drawings, etc.).
❑
At the end of the maintenance operations, remove all the residual
materials and carefully clean the panel.
It’s absolutely forbidden to accommodate additional parts inside the panel.
The manufacturer declines every responsibility
if the points in this chapter are not observed.
CHAPTER 8: MAINTENANCE
8.1
CHAP. 8 - Maintenance
