1/3/2020
Pocket Powerbox Micro
7
Permanently Off
Controller not operational or LED switched off
from software
MOUNTING
Device has two threaded holes (M3) at the bottom to allow mounting on a dovetail.
RECOMMENDATION
•
It is advised to select and use good quality and short length USB cables.
•
Do the same for power cables. Long and thin power cables will have an effect of voltage drops. This can
cause issues to your camera (CCD or CMOS) image quality or mount tracking.
•
Make sure you use a good quality DC input socket with a thick power cable (1.5mm each pole). Verify there
are no gaps that can cause power disconnect
•
Do not loop USB or power cables. This might cause issues in communication.
•
Pay extra attention of you are using
a “
step
up voltage converter”
in the DC input. You need at least 6 Amps
to power all of your devices.
(We don’t recommend step up converters –
buy a good battery or a check our
certified 12V/10A power supply).
