1/3/2020
Pocket Powerbox Micro
3
What is
inside the box
Pocket Powerbox Micro
1 x DC Cable (2.1mm) to Cigarette Lighter (8A
fused)
4 x Power Cables (1 meter)
1 x USB2 Cable Type B (1.8m)
1 x Environmental Sensor (RJ12)
OPERATING INSTRUCTIONS
1.
Plug the external environmental sensor into EXT port (RJ12 port).
2.
Plug the USB2 cable to the controller
’s USB port
and to your computer.
3.
Plug the power supply (battery or power pack) into the “
12V DC IN
” socket. We strongly advise to use our
certified power supply that provides DC 12V / 10 Amps.
4.
Device will boot after three seconds and the LED will turn solid red. This means that firmware was loaded
successfully and the controller is now fully operational.
5.
Default factory settings are set to standalone mode which means:
a.
DC pass through voltage to all four outputs (All outputs are ON and deliver power)
b.
Dew Heater outputs are configured to
Auto-dew
c.
Adjustable Output is enabled and configured to
8 Volts
.
6.
Download USB drivers (Windows 10 should already have installed the latest USB drivers), standalone software
or ASCOM drivers from pegasusastro.com/support in order to connect to the device.
