- 41 -
WARNING: Do not use lockoff clips in
forward facing mode for children whose
weight is less than 11 kg (25lbs).
Important! Remove newborn filler cushion
in forward facing mode (see page 46).
Important!
Do
not
use
rebound
bar
in
forward
facing
mode.
FORWARD FACING MODE USING LAP/
SHOULDER BELT (TYPE II)
1.
Make sure that the backrest is in the upright
position or adjust it using the handle below
the front edge of the shell (A).
2.
Lean the upright child restraint,
unoccupied, on the selected vehicle seat.
Make sure that the UAS straps are stored in
their proper location (page 38 - picture 2) and
that the rear openings in the structure are
free and ready for use. Open the lock off clips
on both sides as shown in the picture.
3.
Pull the vehicle belt at full available
length and thread both the lap and shoulder
portions of the belt through the openings in
the structure behind the child restraint.
4.
Buckle the vehicle belt and check that the
vehicle belts are both threaded through
the openings, free of any entanglement.
4
3
A
A
B
1
2
Installing your child restraint in the vehicle - Forward Facing mode