9 of 14
ISSUED: 04-24-08 SHEET #: 055-9257-9 02-28-14
Visit the Peerless Web Site at www.peerless-av.com
For customer care call 1-800-865-2112
Installing Projector Mount
CEILING INSTALLATION
KK
F
KK
F
EE
GG
GG
FF
ARROW
INDICATES
FRONT OF
MOUNT
ARROW
INDICATES
FRONT OF
MOUNT
fig. 4.1
fig. 4.2
WALL INSTALLATION
(EXCEPT FOR PRG-EXC MODELS)
Installing PRG projector mount with ceiling installation:
Attach vertical mounting plate (
EE
) to PRG projector
mount (
A
) using two M5 x 16 mm socket pin screws (
GG
), four 1/4" washers (
F
) and two locknuts (
KK
) as shown
in figure 4.1.
Installing PRG projector mount with wall installation:
Position PRG projector mount (
A
) to the orientation
shown in figure 4.2 and attach to horizontal mounting plate (
FF
) using two M5 x 16 mm socket pin screws (
GG
),
four 1/4" washers (
F
) and two locknuts (
KK
).
NOTE:
Placing washer (
F
) and nut (
KK
) combination on inside of PRG projector mount first while attaching
mounting bracket (
EE or FF
) can make installation easier as shown in figure 4.3.
A
A
fig. 5.2
CC
EE
ARROW
INDICATES
FRONT OF
MOUNT
JJ
EE
CC
A
F
F
Ceiling installation:
Insert vertical mounting plate (
EE
) into inner channel (
CC
) with PRG projector mount (
A
) in
the correct orientation shown in figure 5.1. Secure vertical mounting plate to inner channel using four M5 x 10 mm
socket pin screws (
JJ
) as shown in figure 5.2.
CEILING INSTALLATION
fig. 5.1
PLACE WASHER (
F
) AND NUT
(
KK
) COMBINATION FIRST
KK
F
A
fig. 4.3
4
5
