10 of 14
ISSUED: 04-24-08 SHEET #: 055-9257-9 02-28-14
Visit the Peerless Web Site at www.peerless-av.com
For customer care call 1-800-865-2112
ARROW INDICATES
FRONT OF MOUNT
CC
FF
fig. 5.3
fig. 5.4
FF
JJ
CC
Wall installation:
Insert horizontal mounting plate (
FF
) into inner channel (
CC
) as shown in figure 5.3. Secure
horizontal mounting plate to inner channel using four M5 x 10 mm socket pin screws (
JJ
) as shown in figure 5.4.
WALL INSTALLATION
(EXCEPT FOR PRG-EXC MODELS)
5
GENERIC PROJECTOR
NOTE:
The projector you are installing may differ in appearance from the sample illustrated below.
Place projector upside down. Locate adapter plate (
B
) with notch facing forward as close to projector center of
gravity as possible without covering any mounting holes. Loosen channels with 4 mm security allen wrench (
I
),
and
if there are only three mounting holes remove fourth channel
. Using one channel for each mounting
hole, position feet of channels over mounting holes as shown below.
Important
: If projector does not have at least
three mounting holes, do not use this adapter plate.
NOTE:
Some projectors have feet which can be removed and the corresponding threaded insert can be used for
a mounting hole.
NOTE:
Once channels are in position retighten fasteners.
*Notch indicates front of projector.
*
MOUNTING HOLE
6
CHANNEL
FOOT OF CHANNEL
Attaching Adapter Plate to Projector
B
A
