© COPYRIGHT 2010 PECO, INC. ALL RIGHTS RESERVED.
P/N 70476 3220-2265 REV 00
10
PerFormance Pro t4000 serIes accessorIes: sensors
The following Performance PRO T4000 Series compatible sensors are available from
PECO, providing optimal control of the environment. Following are sensor wiring diagrams
for temperature averaging and installation instructions for the PECO Indoor Remote Zone
Sensor.
Peco sensors
model
number
Part
number
terminal
t4000
t4500
Indoor Remote
Sensor
SP155-017
69308
S1
9
9
Occupancy Sensor
SB200-001
68375
S2
9
9
Visit www.pecomanufacturing.com to learn more about the benefits of PECO sensors or to
place an order. Contact a service representative today.
locate anD moUnt Peco occUPancY sensor (sB200-001)
Please use the installation instructions for the SB200-001 to mount the PECO Occupancy
Sensor SB200-001.
sensor wIrInG For temPeratUre averaGInG
locate anD moUnt Peco InDoor remote zone sensor
(sP155-017)
warnInG
• READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL,
OPERATE, OR SERVICE THIS SENSOR.
• Failure to observe safety information and comply with instructions could result in
PERSONAL INJURY, DEATH AND/OR PROPERTY DAMAGE.
• To avoid electrical shock or damage to equipment, disconnect power before
installing and use only wiring with insulation rated for full sensor operating voltage.
• This product, when installed, will be part of an engineered system whose
specifications and performance characteristics are not designed or controlled
by PECO. Review applications and national and local codes to assure that the
installation will be functional and safe.
• Do not run low-voltage control wiring in the same conduit with high-voltage wiring.
• Use in indoor applications only.
▲
!
Figure 18.
Wiring nine SP155-017
(10K ohm) temperature sensors.
Figure 17.
Wiring four SP155-017
(10K ohm) temperature sensors.
Figure 19.
SP155-017
Remote Indoor
Zone Sensor,
frontal and side
view.
Figure 20.
SP155-017
Remote Indoor
Zone Sensor,
back view with
mounting holes.
