PEC Miniverter, Руководство пользователя

Страница: 6 / 16

- 6 -
The indicating and controlling elements for the remote controlled units are mounted in a Nema 12
enclosure. The enclosure should be mounted close to the operator's normal position.
Connections from the converter are made to a terminal strip mounted on a subpanel inside the
enclosure. The wiring diagram included with each converter shows the number of wires required
to connect the converter and control unit together. It is a good practice to include a spare wire or
two for future requirements.
3.3 D.C. Hook-Up
The D.C. terminals are 1/2-inch diameter copper studs protruding 1-1/2-inches from the rear of the
cabinet. Cable or bus of sufficient capacity to carry rated D.C. amperes should be used to make the
connections between the rectifier and work.
Figure 2 Remote Control Cabinet Interconnection Diagram