Peavey MediaMatrix Nion, Руководство по оборудованию

Страница: 65 / 94

NION Hardware Manual
September 30, 2010 Version 1.6.1.0 61
malfunctioning, and NioNode
is not configured to use CM-1.
Note: Even if the NioNode has not been configured to use its CM-1 (in the project design),
link and Conductor status are still reported and the unit will be visible as a CobraNet node on
the network it is attached to. You will only see RED, however, if the NioNode has been
configured to use its CM-1 and there is a problem with link or with the CM-1 module.
IDE
GREEN Mass storage (CompactFlash)
read or write activity.
OFF No activity.
Tip: The IDE LED indicator is remarkably similar to the disk status LED you may have on the
front of your PC or on the bezel of your laptop.
Attn
RED BLINKING Indicates there is an error or
warning condition of interest.
OFF No status change of interest.
Tip: This indicator is paired with a button. When the LED blinks, the button can be pressed to
cause the LCD to navigate to a page displaying the source of the condition.
Attn
OFF Unit is off.
ORANGE Unit is booting up or down.
GREEN Unit has booted up.
Enabling error logging
Before you can log and review errors that are generated on a NION, you must enable error
logging via the NION web interface and within NWare.
To enable error logging
1. In NWare, click the Remote Log tab at the bottom window.