SPECIFICATIONS
POWER AMPLIFIER
SECTION
4
with
driver
Rated Power Load:
30 W RMS into 16 or 8 ohms
Power Clipping: (Typically)
THD,
120 V AC line)
30 W RMS into 16 or 8 ohms
(Bias must be reduced to measure)
Frequency Response:
-2
50 Hz to 15
20 W RMS into 16 ohms
Hum Noise:
Greater than 80
below rated
power
Power Consumption:
150 watts,
Hz, 120 V AC
(Domestic)
PREAMP SECTION
2
The following specs are mea-
sured 1
with the con-
trols preset as follows:
Pre Post (lead) 0
Reverb Level 0
Bass Treble EQ 12
Middle EQ 0
Channel Select Out
Boost Switch Out
Nominal level is with Input
Gain 6
Minimum level is with Input
Gain 12
Preamp Normal Input:
Impedance: Very high
470 K ohms
Lead Channel:
(Post Gain 12)
Nominal Input Level: -40
Minimum Input Level: -70
0.3
RMS
Normal Channel:
Nominal Input Level: 17
140
RMS
v
F.S.
Minimum Input Level: -28
40
RMS
Maximum Input Level: 0
1.0 V RMS
Equalization:
(Lead Normal Channels)
Custom bass, middle treble
passive type EQ
Effects Send:
Load Impedance: 1 K ohm
or greater
Nominal Output Level: -6
0.5 V RMS
Effects Return:
Impedance: High 2 M ohms
Designed Input Level: -6
0.5 V RMS (Switching jack
provides Effects Send to Effects
Return connection when not
used)
External Footswitch Function:
Normal/Lead Channel Select
(when Lead activated)
Tremolo Defeat
6
