Pearl PAV 36, Руководство владельца/оператора

Страница: 8 / 16

– 8 –
5.2 OPERATION OF THE CONTROL BOARD
Just simply connect the plug in the socket, then it can come to use.
CONNECTING THE POWER SUPPLY (T-PIN PLUG)
Connect the plug at the end of wire to the power supply.
START BUTTON
When the power is On, the indicator
①
/
②
/
③
will illuminate. Just simply
press the button one by one, each motor will start working.
STOP BUTTON
Press the button to the Off side, the motor will stop; Unplug the vacuum
the light will turn off.
5.3 OPERATION OF DUST CLEANING
Two areas need to be clean: the first area is to clean up the 1st filter cartridge and collection bag; the
second area is to clean up the cartridge filters.
5.3.1 OPERATION OF THE COLLECTION BAG
Regarding to clean up of the 1st filter cartridge, please refer to Fig. 4.1. As for the foldable long tube
plastic bag, it could be continuously pulled out. When it collects a certain amount of dust, it could be
sealed by the nylon cable tie and then cut it off with a scissor. See the photos below:
FIG 5.6
Control Board
FIG 5.3.1
Collection Bag
STEP 1 STEP 2 STEP 3