Pearl PAV 36, Руководство владельца/оператора

Страница: 11 / 16

– 11 –
7.2 TROUBLESHOOTING AND ELIMINATION METHOD
PROBLEM POSSIBLE CAUSE SOLUTION
- Phase sequence inversed
- Factory voltage fluctuation is too
big, cause undervoltage or
overvoltage
- High electricity current cause
thermal overload protector to
disconnect.
- Exchange power cord L1 and L2.
- Factory provides solution
themselves.
- Inspect if the motor is still working,
if yes, the thermal overload device
may disconnect.
- Flue gas moisture condensation
dust block the filter cartridge/bag
- Process system doesn’t work
- Blocking air leakage, increase the
temperature of the flue gas.
- Recover to work
- Suction hose blocked or damaged
- Filter cartridge blocked
- Clean or replace
- Clean or replace the filter
VACUUM CLEANER
DOESN’T WORK
- Filter cartridge/bag is with wrong
installation
- Filter cartridge/bag damaged
- The first time using after
replacement of the filter
- Install and adjust the position of the
filter units.
- Replace
- Use the filter continuously for about
15 minutes.
EMISSION CONCENTRATION
IS TOO LARGE
ABNORMAL RUNNING
RESISTANCE
LACK OF SUCTION POWER
NOTE: If there is a special malfunction happen to the vacuum or the received vacuum has a big difference with
original design, please contact us in time for solution.