46
RECORDER
Record source is selected in Setup. It is possible to:
• Record some music from external source
(using Mimic Pro AUX IN) and jam with it.
• Record drums only.
• Record external source plus Mimic Pro
Drums.
Maximum length of the recording in the current
version of Mimic Pro software is 10 minutes.
Recorder Control Buttons:
•
LOOP enables the loop mode.
•
GRID SNAP enables the snap to grid
mode (for play position cursor movement,
left and right loop locator movements).
•
RETURN TO START makes the play
position cursor return to the playback
start position after stopping.
•
FOLLOW makes the wave follow the play
position cursor movement.
•
METR turns on the Metronome.
Other controls include
Record, Play, and Setup.
Buttons on the right side are a bit different from
others. Their functions are enabled by holding
the button down and turning the data wheel while
holding:
•
LOOP START sets the position of the loop
start locator (red vertical line).
•
LOOP END same for the loop end locator
(blue vertical line).
•
ZOOM zooms the wave in/out.
•
MOVE moves the wave start position. Use
it for aligning the wave to the tempo grid.
•
BPM is current metronome tempo value
adjustment.
•
SPEED is playback speed adjustment,
which is great for practice (slowing down
the records).
•
VOL is playback volume.
You can save your recording to a USB flash drive.
To start a new recording first save your current
one, then go to the start of the playback and record
over the existing recording.
The
Recorder in Mimic Pro allows to record your performance along with other audio sources and play it back
looped and in different speeds.
Pic 57: Recorder
