-57-
5.3 Using the Multimeter with the Thermal Imager
In IR+DMM mode, MODE key, RANGE key, HOLD key and REL Function are the same
as in DMM mode.
Capturing MAXMIN Values on IR+DMM mode
1. To activate the max/min mode, press the softkey
labeled◄ , and display max value.
2. If the Meter is already in the max/min function, then
Press the ◄ key to display min value, then Press the ◄ key
to display current measurement value. next press again
display max value.
3. Press and hold the ◄ key for more than 1 second to
cause the Meter to turn off max/min.
Capturing Peak Values on IR+DMM mode
1. To activate the peak mode, press the softkey labeled ►,
and display Peak max value.
2. If the Meter is already in the peak function, then Press
the ► key to display Peak min value, then Press the ► key
to display current measurement value. next press again
display Peak max value.
3. Press and hold the ► key for more than 1 second to
causes the Meter to turn off peak.
