10. How to Measure Automatically
Click
to show Function menu, choose “
Measure
”.
Automatic measurement works under this function. Totally twenty kinds of measurements. At most 8
types of measurements could be displayed on the bottom left of the screen. The oscilloscopes provide
20 parameters for auto measurement, including Vpp, Vmax, Vmin, Vtop, Vbase, Vamp, Vavg, Vrms,
Overshoot, Preshoot, Freq, Period, RiseTime, FallTime, +Width, -Width, +Duty, -Duty.
Show All:
Choose channel from the list on the right side of "Show All", a pop-up window will show all the
measurement values.
10.1. Add measurement
:
Check the channel and measurement type. Measurement results display on the bottom left. You can
add 8 types at most for each channel.
If 8 types is exceeded, the former option will be canceled. The measured values of two channels can
be displayed simultaneously.
10.2. Remove measurement:
Uncheck the measurement type to remove it. Click "Remove All" to remove all measurements.
-70-
