Slope Trigger
Choose Mode as "Slope" to set the oscilloscope as the positive/negative slope trigger within the
specified time.
1. Select slope condition.
2. Set slope time.
3. Set the High level upper limit and Low level lower limit.
4. Set Trig Mode and Hold Off. About the setting method, refer to
Edge Trigger.
Slew rate = (High level
– Low level) / Settings
Pulse Width Trigger
Choose Mode as "Pulse". Pulse trigger occurs according to the width of pulse. The abnormal signals
can be detected through setting up the pulse width condition.
1.
Select pulse width condition and set time.
2. Set trigger level.
3. Set Trig Mode and Hold Off. About the setting method, refer to Edge Trigger.
Instruction of Trigger mode icon in Trigger window:
Rise in Edge mod
Fall in Edge mode
Rising in Slop
Falling in Slope
+Pulse Widt
-Pulse Width
-68-
