11
2. Install tire stop plate with bolts and washer on the platform
: Tighten the platform
on cross beam
B
with bolts, tighten the tire stop plate on cross beam
A
with bolts
Note:
The bolts for the side with tire stop plate is longer, pay attention when choosing the
bolts
(See Fig.18)
Instruction
: 1). This lift is designed in both side (cross beam
A
and cross beam
B
) car in
direction, user can install the lift according to the location. Below is the installation for the side
of cross beam
B
car in direction. If choosing the side of cross beam
A
car in direction, then
install the tire stop plate to the other side.
2). Power-side column can be installed at any position on customers’ requirement, but the
power unit must be installed near the side with the safety lock release handle.
Fig. 18
Car in direction
5
Cross beam
B
Cross Beam
B
Interchange the installed
position
according
to
demand
24
26
25
Tighten the platform
with bolts M16*30
27
28
Tighten the bolts
M16*35 with
washer
Fixed the offside platform with bolts
