22
N. Install drive-in ramp, jack tray and plastic oil pans
(See Fig. 32)
.
According to the below diagram screw up the M16*30 bolts, then attach the drive-in ramp.
O. Install Rear wheel stop plates
(See Fig. 33)
After driving the vehicle on the lift, take off the drive-in ramp, install rear wheel stop plates
to the drive-in ramp position.
Fig. 32
Screw the M16*30 bolts to the
side hole of the cross beam
Attach the drive-in ramp
with the bolts
63
Fig. 33
7
65 Optional kit
65A Optional kit
