background image

Page 14

Go Online or Complete and Return

You can register for your 

FREE 12 month Warranty 

with ease online at 

www.peakscientific/protected

.

Alternatively, you can send the completed form to Peak Scientific by post or 
email at 

[email protected]

.

Product Warranty Registration

Contact name

Email address

Company

Address

City/town

Postcode

Country

Telephone

Generator serial #

Model type

Installation date

Do you still use an 
alternative gas solution i.e. 
cylinders or bulk liquid?

Yes                 No

What gas requirements do 
you have in your lab?

Hydrogen             Nitrogen            Zero Air

Extend your cover with

Peak Scientific offer comprehensive gas generator after sales support packages.  
Peak [Protected] aftercare support can guarantee an on-site response within 
72 hours*, genuine parts from our ISO9001 approved factory and a 95% first-time 
fix rate.  See our enclosed Peak [Protected] leaflet for further information.

Important!

You have 1 month to register your Peak Scientific product from the date of installation. Once registered 

the warranty will be honoured for a period of 12 months. If you wish to defer the installation of your 

generator, you must notify Peak Scientific immediately by emailing [email protected]

For generators that remain unregistered after 1 month from the shipment date, the warranty will be 

considered active from the date of factory dispatch.

* Complete Plan only

Go Online or Complete and Return

We know that registering any of your recently purchased products is not the 

first thing on your mind- but it is very important to both of us. Not all warranties 

are alike and Peak Scientific stand out against other gas suppliers as we offer a 
comprehensive, quick response, on-site warranty.  This means that in the very 

unlikely case that your gas generator develops a fault we have rapid support 
teams on-hand around the world who are able to come to your lab and get you 
back up and running in no time.

Register for your 

comprehensive 12 month on-site warranty 

with ease online at 

www.peakscientific.com/register.

Alternatively, you can send the completed form to Peak Scientific by post or 
email at [email protected].

Important!

You have 

1 month to register

 your Peak Scientific product from the date of 

installation. Once registered the warranty will be honoured for a period of 12 
months. If you wish to defer the installation of your generator, you must notify 
Peak Scientific immediately by emailing 

[email protected].

 For 

generators that remain unregistered after 1 month from the shipment date, the 
warranty will be considered active from the date of factory dispatch.

Содержание MS Table Series
















Отзывы: