Peak Scientific Infinity 1045, Руководство пользователя

Страница: 20 / 24

Page 20
Cleaning
Clean the outside of the generator only using warm soapy water and a clean damp
cloth. Ensure all excess fluid is thoroughly removed from the cloth prior to use.
Under no circumstances should any solvents or abrasive cleaning
solutions be used as these can contain fumes that could be harmful to
the generator.
Care should be taken with Leak Detections Liquids.
Safely Isolated Condition
The unit is in a safely isolated condition when it is disconnected from its application and
fully de-pressurised. Directions for isolating the Generator are shown below.
Failure to place the Generator in a safely isolated condition when
instructed to do so may lead to personal injury or injury to others and
even death.
1. Disconnect from air supply.
2. Ensure the output pressure gauge reads zero. (If gauge does not fall to zero, open
the manual ball valve at the outlet port, to allow trapped gas to escape.)
3. Disconnect from the application.
CAUTION
CAUTION
WARNING