Peak Scientific Genius XE QSD, Руководство пользователя

Страница: 23 / 27

Page 23
Troubleshooting
Problem Possible Solution
The Generator will not switch on and the power switch
does not illuminate.
• Ensure power cord is plugged into the Generator
and that the power socket is turned on.
• Check the fuse in the power cord plug.
• Contact your service provider.
Compressors are running but pressure is not building. • Contact your service provider.
The mass spec is reporting low pressure. • Contact your service provider.
Yellow “SERVICE” LED on front panel is on constantly.
• A compressor(s) due for service. Contact your
service provider.
• Refer to Service Indication section of this manual for
further information.
Yellow “SERVICE” LED on front panel is flashing.
• A compressor(s) has not cycled for 8 hours. Refer to
the Run Time Alarm section of this manual.
• Ensure ambient temperatures are within the
specification.
• Turn the Generator off and on to reset the alarm and
contact your service provider.