background image

Page 7

Environmental Declaration

We   

 

Peak Scientific Instruments Ltd.

Of 

 

 

Fountain Crescent, Inchinnan, Renfrewshire, PA4 9RE

Declare that:

 

Equipment:  

Nitrogen Gas Generator

 

Models: 

 

Genius XE QSD

Is fully compliant with the following Directives.

•  2012/19/EU 

 

 

WEEE (Waste of Electrical and Electronic Equipment)

•  2011/65/EU & 2015/863 

RoHS  (Restriction of Hazardous Substance)

Peak Scientific Instruments Ltd fully complies with its obligations towards the European 

WEEE (Waste of Electrical and Electronic Equipment) Directive 2012/19/EU. These 

obligations are being met within the B2B compliance group.

Peak Scientific Instruments Ltd, herewith confirm that as a manufacturer of articles we 

conform to the European Parliament and Council Directives, 2011/65/EU for the original 

6 restricted substances listed in the Restriction of Hazardous Substances (RoHS) 

Directive and Commision Delegated Directive (EU) 2015/863 to include 4 additional 

restricted substances. Peak Scientific Instruments LTD have developed all reasonable 

'due diligence' controls to ensure that our products comply with the principles and 

requirements of the RoHS (Restriction of Hazardous Substances) Directives.

Where a specific certificate of compliance is required, this can be requested, on 

a product serial number basis, directly from Peak Scientific Instruments Ltd, by 

contacting us through our website at 

www.peakscientific.com

Signed: 

   Name: Chris 

Pugh

Date: 

 25/02/2019 

 Position: 

Engineering 

Director

Содержание Genius XE QSD




























Отзывы: