Peak Pilates MVe Reformer Mat Set Скачать руководство пользователя страница 3

3

Do not

• 

 tip the machine during use. 

Children must not be allowed near this machine. Teenagers and/or physically challenged individuals require supervision.

• 

Verify that all adjustable components are properly engaged in the exercise and not the storage positions before beginning to exercise.

• 

It is the purchaser’s sole responsibility to instruct end users and supervising personnel on the proper operating procedures of the 
MVe Reformer with Tower. 

We 

strongly

 recommend that the end user’s physical condition be evaluated by a physician prior to beginning any exercise program. 

NOTE: 

Understanding each and every warning to the fullest is critical. If any of these warnings are unclear, contact  

Peak Pilates for clarification.

Warranty 

 

 

 

 

 

 

Congratulations on the purchase of your MVe Reformer Tower Kit. Peak Pilates warrants this accessory to be free of manufactur-
ing defects. Any parts that are repaired or replaced under the terms of this agreement will be warranted for the remainder of the 
term of the original warranty.

This warranty becomes effective on the invoice date of the original purchase and extends to the time limits indicated below:

This product carries a two year limited warranty on the Tower structural components.

All other components, with the exception of the upholstery, straps and loops, are covered by a one year limited warranty. If a 
failure due to workmanship and/or materials occurs, we will, at our discretion, repair or replace the defective components.

Upholstery, straps, and loops are warranted against defects in workmanship and/or materials for 60 days.

This warranty refers to the Peak Pilates MVe Reformer Tower Kit and covers materials only. It remains in effect only under the 
following conditions:

This machine is not modified in any way. The machine is only used as specified in the manual and in accordance with generally 
accepted Pilates exercise practices. Accidents, abuse, misuse or improper service will not be covered under the provisions of this warranty.

This warranty only applies to the original purchaser of this equipment and is not transferable. All claims must be made within 
the relevant warranty period specified above. Warranty claims made outside the U.S. may vary.

Contact Information

Peak Pilates
5555 Central Avenue, Suite 200
Boulder, Colorado 80301
303.998.1531 (Worldwide)
(+1) 800.925.3674 (North America)
(+1) 303.473.9142 (Fax)

Specific Operating Warnings (continued)

MVe_Tower_Owners_Manual-10_09.indd   3

12/4/09   4:21:17 PM

Содержание MVe Reformer Mat Set




















Отзывы: