11
Tool required: #2 Phillips Head Screwdriver
5.
Looking inside, locate and remove the three wood
screws that are used to assemble the plastic Head
End Cap to the Frame.
With the help of an assistant, place the machine
6.
back to its upright position.
Tools required: 17 mm Open End Wrench or Pliers
7.
and 6mm Allen Wrench
Removing/Replacing the Head End Cross Member:
Using a 17mm Open End Wrench or Pliers to
a.
hold the flats of the Shaft, loosen and remove
both of the assembly screws for the Telescoping
Lift Handle with a 6 mm Allen Wrench.
Completely withdraw the Lift Handle.
b.
Remove the plastic end cap.
c.
Note: The wood and plastic will have to be lifted
slightly to be able to remove the end cap.
STEP 5
STEP 7a
STEP 7c
MVe
®
Tower Retrofit Procedures (continued)
MVe_Tower_Owners_Manual-10_09.indd 11
12/4/09 4:21:27 PM
