www.peakpilates.com
11
INSTALL THE END PANEL
INSTALL THE ROPES
ATTACH THE FOOT STRAP
12
13
14
15
Align the wood end panel with the aluminum end panel.
make sure that the Peak Pilates® logo is reading correctly.
Install the 6 small flathead screws from inside the reformer.
Feed the free end of each rope through the pulley on the
riser. Now locate the cleat and pull the lever towards the
head end. Take the end of the rope and feed it downward
through the chrome hole guide. Drape the double
loops over the shoulder blocks. Now pull on the end of the
rope to take out the slack. Repeat for the other side.
To attach the foot strap, fasten one safety link to
each of the eye bolts located under the foot end
cross member.
Tighten the safety link locking nuts.
MAKE SURE THAT THE ROPES ARE ADJUSTED TO EQUAL LENGTHS AND
THE ROPE LOCK IS ENGAGED BEFORE USE.
NOTE:
PEAK-CASA-OM-2020.indd 11
PEAK-CASA-OM-2020.indd 11
4/16/20 8:23 PM
4/16/20 8:23 PM
