PDI-P15LCDB User Manual
Document Number: PD196-096 Rev 2
- 11 -
ACROSS-ROOM WIRING
A ¼” stereo style pillow speaker (pendant control) jack is located on the TV’s connector panel on
the backside. The PDI-P15LCDB is designed to work with either a digital pillow speaker or a
single-button analog (switch-style) pillow speaker. The PDI-P15LCDB also supports certain style
pillow speakers with a number pad for direct channel access. The following pillow speakers have
been tested with the PDI-P15LCDB. Please contact the pillow speaker vendor directly for an
additional listing of models and available options.
Make
Analog
Digital
Digital Direct Access
Curbell
3103-001 3D0103096000ZM0-001 D0108-A0Z-R0001
Medtek
A1833-087 A1871-085T
A1552-087D,
A1871-087D,
Crest
XL031E0AXXXZ1N1
XL031E1AJ00Z1N1
XL031X0AXXXZ1N1
XL031X1AJ00Z1N1
Use type SJ cord or better for the across room wiring between the TV and the bedside pendant
control. A pin-out is provided below.
WARNING:
DO NOT connect the pillow speaker circuit Common to earth ground.
Grounding of the Common will defeat the isolation circuitry of the PDI-P15LCDB
and possibly expose the patient to harmful shock currents should a wiring fault
occur.
CAUTION
Installer. This product is not provided with a pendant control. It is
expected that the institution (or hospital) will provide one for attachment to the
Pillow Speaker Jack on the back of the TV. As part of the installation,
examine the pendant control to verify whether a marking similar to the one
below appears on it:
‘
CAUTION – Risk of fire if used in oxygen-enriched atmosphere – return to
hook or holder after use.’
SPEAKER
DATA / SWITCH
COMMON
SPEAKER
DATA / SWITCH
COMMON
Jumper Supplied
with TV
Optional Jumper
ACROSS ROOM WIRING
